| Author | Repairing arts |
|---|
| Can i repair an art that has 0 durability. and befor you say im not a smith and wont be until i reach a higher level i know. i just would like to no if it possible |
Smiths’ guild
To enter this guild, you should get the combat level 6 and build a Blacksmith in your castle. Enter it and open the "repair" section and you will be able to repair worn out artifacts.
Smiths’ guild
Any artifact with durability 0/X can be repaired. Repairing efficiency depends on the guild level and varies from 10% to 90%. For instance, the guild novice will repair artifacts with 10% efficiency, which means, that a worn out artifact of 0/30 will have 3/29 durability after repairing, while an experienced blacksmith with 60% efficiency would turn it to 18/29 durability.
Repair cost with any efficiency makes 40% of the estimated artifact cost (according to the prices of the shop), while worn out artifacts buyout rate is 65%, making you pay only 35% to completely restore a shop artifact. The guild warns that smithing is an art, and usually leads to money loss. Rare or enchanted artifacts repairing certainly make an exception, though, since you cannot buy them in the shop.
1) Repair time and cost do not change with the smiths’ guild leveling. The only thing that increases is the efficiency, hence the artifact's new durability;
2) Repair time and guild points gained only depend on the estimated value of the artifact and are in direct proportion to it. Thus, the more expensive the object is, the longer time it will take to repair it and the more guild points it will grant;
3) Repairing two artifacts at a time is not possible, moreover, you can only do one type of works in your blacksmith (the blacksmith has several sections).
The amount of guild points necessary for "smithing up" can be learned from the experience tables. |
| ok right one more question. how come when i go on the marketsome artifacts have 10/10 durability but the same artifact can have 9/9 durability? |
| It is because when the item is at 0/10, it is sent for repair... It will become 9/9 if the repairing is 90% efficiency, but unless now none has reached tat stage yet... |
| so if i repair something that is 10/10 if i repair with 80%efficiency will it become 8/8 |
| instead of 8/10 that is surely quite annoying when your repairing stuff over and over again |
no
did you read post 2?
then youll understand that you just made a few mistakes in your post |
| yeah i thought so but then does that mean that chrisgong is wrong and if he is why are some artifacts 10/10 whilst others are 8/8 the same art |
| right i get it each time you repair you lose 1 of of the maximum durability |
if you are to lazy ro read post 2, why should we answer you?
- if an item is 10/10 you cant repair it >.>
- if an item is 0/10 it can NEVER become 8/8 with 1 repair...
- If an item is 0/10 and you repair with 80% efficiency, it becomes 8/9 |
| well i did read post 2 thank you im not too lazy i just didnt understand it perfectly |
| if you repair 0/9 with 80% then will it be 8/8? or 7/8? |
7/8.
9 x .8=7.2,and it rounds down. |
| closed by Elven_Lord (2009-01-19 10:11:29) |
|---|
